Technical Update
Device(25)
Document Title
|
Doc Number (Previous Number) |
Issue Date Revision |
Classification of Information
|
Size(KB)
| Product Name |
Remarks
|
|
|---|---|---|---|---|---|---|---|
|
R8C/3x Series Descriptions Complemented in the User's Manual: Hardware
R8C/3x Series Descriptions Complemented in the User's Manual: Hardware | TN-R8C-A024A/E | May.09.12 Rev.1.00 |
Technical Notification |
20 |
-
| ||
|
R8C/3JA, R8C/3JC, and R8C/3JM Group Specifications of UART0 and UART1 Added
Specifications of UART0 and UART1 Framing Error Flag and Error Sum Flag Added | TN-R8C-A023A/E | Apr.20.12 Rev.1.00 |
Technical Notification |
136 |
-
| ||
|
Notes on R8C Family (3)
Notes on R8C Family | TN-R8C-A018A/E | Jun.28.11 Rev.1.00 |
Technical Notification |
21 |
-
| ||
|
Notes on R8C Family (2)
Notes on R8C Family | TN-R8C-A016A/E | Dec.07.10 Rev.1.00 |
Technical Notification |
25 |
-
| ||
|
Corrections for A/D Conversion Time
Corrections for A/D Conversion Time | TN-R8C-A015A/E | Jun.21.10 Rev.1.00 |
Technical Notification |
90 |
-
| ||
|
R8C/1x Series, R8C/2x Series, R8C/3x Series, R8C/Lx Series Note on Supply Voltage Fluctuation
A general note pertaining to supply voltage variations. | TN-R8C-A014A/E | Jun.21.10 Rev.1.00 |
Technical Notification |
27 |
-
| ||
|
Notes on Complementary PWM Mode and Reset Synchronous PWM Mode of Timer RD
Regarding output level when the timer count stops during operation | TN-R8C-A012A/E | Mar.25.10 Rev.1.00 |
Technical Notification |
34 |
-
| ||
|
R8C Family Notes on I2C-bus Interface
Notes on I2C-bus Interface | TN-R8C-A011A/E | Mar.25.10 Rev.1.00 |
Technical Notification |
35 |
-
| ||
|
Notes on Low-Consumption-Current Read Mode
Please note descriptions when using low-consumption-current read mode by the FMR27 bit in the FMR register(low-consumption-current read mode enable bit). | TN-R8C-A004B/E | Dec.08.09 Rev.2.00 |
Technical Notification |
32 |
-
| ||
|
Correction to the R8C/3JA Group Package
Correction to the R8C/3JA Group package code and dimension | TN-R8C-A009A/E | Oct.07.09 Rev.1.00 |
Technical Notification |
133 |
-
| ||
|
Correction of Notes on Power-on Reset Circuit Characteristics
Correction of Notes on Power-on Reset Circuit Characteristics | TN-R8C-A008A/E | Oct.02.09 Rev.1.00 |
Technical Notification |
103 |
-
| ||
|
Notes on R8C Family
Notes on R8C Family | TN-R8C-A007A/E | Sep.25.09 Rev.1.00 |
Technical Notification |
33 |
-
| ||
|
Notes on Timer RG
Notes on Timer RG | TN-R8C-A006A/E | Sep.25.09 Rev.1.00 |
Technical Notification |
85 |
-
| ||
|
Notes on Option Function Select Area (OFS and OFS2)
Notes on Option Function Select Area (OFS register, OFS2 register) | TN-R8C-A005A/E | Sep.25.09 Rev.1.00 |
Technical Notification |
26 |
-
| ||
|
R8C/32A Group R8C/33A Group R8C/35A Group R8C/36A Group R8C/38A Group R8C/3GA Group R8C/3JA Group Specification Change
R8C/32A Group, R8C/33A Group, R8C/35AGroup, R8C/36A Group, R8C/38A Group,R8C/3GA Group, R8C/3JA GroupSpecification Change | TN-R8C-A001B/E | Sep.24.09 Rev.2.00 |
Technical Notification |
91 |
-
| ||
|
Notes on Low-Consumption-Current Read Mode
Please note descriptions when using low-consumption-current read mode by the FMR27 bit in the FMR register(low-consumption-current read mode enable bit). | TN-R8C-A004A/E | Jul.28.09 Rev.1.00 |
Technical Notification |
30 |
-
| ||
|
R8C/3x Series R8C/Lx Series Notes on the A/D Converter
Notes on the A/D Converter | TN-R8C-A003A/E | Jun.05.09 Rev.1.00 |
Technical Notification |
17 |
-
| ||
|
R8C/Tiny Series Notes on Writing to Timer RA Register
Notes on Writing to Timer RA Register | TN-16C-A164A/E | Mar.30.07 Rev.1.00 |
Technical Notification |
67 |
-
| ||
|
M16C Family Precaution Concerning Exiting from Stop Mode
SCLL sync output enable is available in I2C bus interface mode only. | TN-16C-124A/EA | Sep.01.04 Rev.1.00 |
Technical Notification |
162 |
-
| ||
|
M16C Family Usage Precautions when Clearing Interrupt Request Bit
When clearing an interrupt request bit of the interrupt control register, depending on the instruction used, an interrupt request bit may not get cleared. | TN-M16C-85-0204 | Apr.01.02 Rev.1.00 |
Technical Notification |
24 |
-
| ||
|
CAN transceiver control method with boot mode
When writing in the internal flash memory via CAN in boot mode, set the mode of CAN transceiver as high-speed mode or normal operation mode. | TN-M16C-82-0201 | Jan.16.02 Rev.1.00 |
Technical Notification |
40 |
-
| ||
|
M16C Family Cautions Using Data Registers that Include Write Only Bits
If performing a read-modify-write sequence of instructions to a register with write only bits, please reset the write only bits to their previous values before writing back to the register. | TN-M16C-55-0006 | Jun.01.00 Rev.1.00 |
Technical Notification |
46 |
-
| ||
|
M16C/60, M16C/20 Series Precautions for Wait and Stop modes
The interrupts for canceling the WAIT and STOP modes must be enabled before entering either mode. The priority level of the interrupts not used for these modes should be set to 0 before switching into the WAIT or STOP modes. | TN-M16C-25-9905 | May.16.99 Rev.1.00 |
Technical Notification |
15 |
-
| ||
|
Precautions Regarding Writing to M16C/60, M16C/61, M16C/62 and M16C/63 Group MCUs Interrupt Control Registers
An incorrect interrupt may occur when the request bit of the interrupts is cleared or the interrupt priority level is changed in interrupt enable condition. | TN-M16C-14-9805 | May.22.98 Rev.1.00 |
Technical Notification |
19 |
-
| ||
|
Note on using the A-D converter of the M16C/60 series MCU
When the A-D register is read at the same time the A-D conversion results are being saved, a false value will be saved to the A-D register. This occurs when the divided main clock or sub-clock is used as the CPU internal clock. | TN-M16C-09-9705 | May.16.97 Rev.1.00 |
Technical Notification |
14 |
-
|
Others(10)
Document Title
|
Doc Number (Previous Number) |
Issue Date Revision |
Classification of Information
|
Size(KB)
| Product Name |
Remarks
|
|
|---|---|---|---|---|---|---|---|
|
Standardization of moisture-proof aluminum bags and addition of drying agent specifications (expansion of target products)
Standardization of moisture-proof aluminum bags and addition of drying agent specifications (expansion of target products) | TN-WRP-A015A/E | May.18.12 Rev.1.00 |
Packing Change |
325 |
-
| ||
|
Change of inner packing label
Change of inner packing label | TN-WRP-A014A/E | Jul.13.11 Rev.1.00 |
Packing Change |
344 |
-
| ||
|
Shape change of 52 pin LQFP(PLQP0052JA-A) support lead
We change support lead shape of 52 pins LQFP(PLQP0052JA-A) for the productivity improvement and the quality stabilization of the assembling process of the package. | TN-PMC-A003A/E | Jan.23.09 Rev.1.00 |
Package Change |
140 |
-
| ||
|
Change of the locking pin position in the magazine (P750PC) used for shipment
Change of the locking pin position in the magazine (P750PC) used for shipment | TN-WRP-A013A/E | Nov.12.08 Rev.1.00 |
Packing Change |
710 |
-
| ||
|
Change with the stable supply of trays
Change with the stable supply of trays | TN-WRP-A012A/E | Sep.30.08 Rev.1.00 |
Packing Change |
1129 |
-
| ||
|
Change of plastic reel of 330mm in diameter for embossed carrier tape (Standardization of plastic reel)
Standardization of plastic reel of 330mm in diameter to that complying with the JEITA standards (so-called EIAJ reel). | TN-WRP-A010A/E | Mar.24.08 Rev.1.00 |
Packing Change |
71 |
-
| ||
|
Change of content printed on the side of inner box
We will unify the content printed on the inner box for IC trays for the purpose of standardizing our tray packaging specification. | TN-WRP-A009A/E | Jan.09.08 Rev.1.00 |
Packing Change |
30 |
-
| ||
|
Addition of Shipping Tray Type for LQFP2020 Packages
Tray forming die is added in response to the increasing production of LQFP2020 packages, and for through handling in manufacturing factories, new tray type name is adopted. | TN-WRP-A007A/E | Jun.07.07 Rev.1.00 |
Packing Change |
136 |
-
| ||
|
Change of reel diameter of embossed carrier tape (330 mmf reel to 254 mmf reel)
Change of reel diameter of embossed carrier tape(330 mmf reel to 254 mmf reel) | TN-WRP-A006A/E | Feb.14.07 Rev.1.00 |
Packing Change |
309 |
-
| ||
|
Change of Carrier Tape Material *Change from polyvinyl chloride (PVC) to polystyrene (PS).
The career tape material is changed from PVC to PS. | TN-WRP-A005A/E | Jul.05.06 Rev.1.00 |
Packing Change |
32 |
-
|
Americas

Loading...